| MAKE |
Uniphos Pro |
| Weight |
500 gms |
| Sensors |
Up to 4 different gas sensors |
| Runtime |
About 7 - 8 hours |
| Display |
Large 20 X 4 Alphanumeric OLED |
| Operating Temperature |
-10°C to 50°C |
| Power Source |
7.4V, 1500 mAh Li-ion rechargeable battery pack |
| Accuracy |
Inherently +/- 2% FS (depends on calibration gas & method) |
| Drift |
Less than 2% of the signal per month at constant temperature and pressure |
| Inbuilt Pump |
Flow rate: 400 to 800 ml/min
Power: 4.0V DC, 60 mAh |
| Range & Resolution |
Annexure 1 |
| Sampling Modes |
1) Diffusion: Default mode, shows concentration of all four gases simultaneously.
2) Drawing: Draws Gas sample on continuous basis. Pump remains ON till SET key is pressed to stop sampling.
|
| Alarm Set Point |
One user-settable alarm set point for each gas |
| Data Transfer |
USB communication for data transfer from instrument to computer |
| Data Storage |
Stores test records with gas concentration, alarm set points, date, and time |
| Function Keys |
UP, DOWN, SET & ENTER |
| Instrument Enclosure |
High Impact ABS |
| Size |
Height = 190 mm
Width1 = 110 mm
Width2 = 65 mm
Depth = 40 mm
|
| Accessories |
Dust filter, Battery charger, and Data downloading cable |
| Oxygen |
Range: 0 - 25 %V/V, Resolution: 0.1 %V/V |
| Combustible Gas |
Range: 0 - 100 %LEL, Resolution: 1 %LEL |
| Toxic Gas |
Range: As per requirement |
